Nickel-chromium-chromium resistance heating alloy wire

Nichrome Chromium Electric Resistance Heating Alloy WireDescriptionFe-Cr-Al alloy wires are made of iron chromium aluminum base alloys containing small amounts of reactive elements such as yttrium and zirconium and produced by smelting, steel rolling, forging, annealing, drawing, surface treatment, resistance control test, etc.&

Featured Products

Nichrome Chromium Electric Resistance Heating Alloy Wire

Description
Fe-Cr-Al alloy wires are made of iron chromium aluminum base alloys containing small amounts of reactive elements such as yttrium and zirconium and produced by smelting, steel rolling, forging, annealing, drawing, surface treatment, resistance control test, etc.
 
 
The high aluminum content, in combination with the high chromium content let the scaling temperature can reach to 1425ºC (2600ºF);
 
Fe-Cr-Al wire was shaped by means of high speed automatic cooling machine of which the power capacity is controlled by computer, they are available as wire and ribbon(strip).
 
Product forms and size range 
 
Round wire 
0.010-12 mm (0.00039-0.472 inch) other sizes are available on request.
 
Ribbon (flat wire) 
Thickness: 0.023-0.8 mm (0.0009-0.031 inch) 
Width: 0.038-4 mm (0.0015-0.157 inch) 
Width/thickness ratio max 60, depending on alloy and tolerance 
Other sizes are available on request.
 
Resistance electric heating wire has strong antioxidant properties, but a variety of gases in furnaces such as air, carbon, sulfur, hydrogen and nitrogen atmosphere, still have a certain impact on it.
 
Although these heating wires all have had antioxidant treatment, the transportation, winding, installation and other process will cause damage to a certain extent and reduce its service life.
 
In order to extend the service life, customers need to do pre oxidation treatment before using. The method is to heat alloy elements which have installed completely in the dry air to the temperature (lower 100-200C than its maximum using temperature), heat preservation for 5 to 10 hours, then cooling slowly with furnace.
 
Features and advantages
1. High using temperature, the maximum using temperature can reach 1400C (0Cr21A16Nb, 0Cr27A17Mo2, etc.)
2. Low temperature coefficient of resistance
3. Lower thermal expansion coefficient than the Ni-base super-alloys.
4. High electrical resistivity
5. Good corrosion resistance under high temperature, especially under the atmosphere containing sulfides
6. High surface load
7. Creep-resistant

8. Lower raw-material cost, Lower density and cheaper price compared with Nichrome wire.
9. Superior oxidation resistance at 800-1300ºC
10. Long service life
 
Application
 
Our products (FeCrAl) high resistance electric heating wire materials are salable and widely used for making heating equipment like industrial furnace, civil heating appliance, various electrical resistors and locomotive braking resistor, infrared equipment, liquefied gas infrared heat-resisting net, different kinds of igniting and radiating electrodes and voltage-regulating resistors for motors and so on in Metallurgical machinery, medical, chemical, ceramics, electronics, electrical appliances, glass and other civil or industrial fields.

Main characteristics of Fe-Cr-Al- high resistances electric heating alloys
Brand name1Cr13Al40Cr25Al50Cr21Al60Cr23Al50Cr21Al40Cr21Al6Nb0Cr27Al7Mo2
Main chemical composition%Cr12.0-15.023.0-26.019.0-22.022.5-24.518.0-21.021.0-23.026.5-27.8
Al4.0-6.04.5-6.55.0-7.04.2-5.03.0-4.25.0-7.06.0-7.0
REopportune
amount
opportune
amount
opportune
amount
opportune
amount
opportune
amount
opportune
amount
opportune
amount
FeRestRestRestRestRestRestRest
      Nb0.5Mo1.8-2.2
Max.continuous
service temp.of
element (
ºC)
950125012501250110013501400
Resistivity
μΩ.m,20
ºC
1.251.421.421.351.231.451.53
Density
(g/cm3 )
7.47.107.167.257.357.107.10
Thermal
conductivity
KJ/m.h.
ºC
52.746.163.260.246.946.145.2
Coefficient of
lines expansion
α×10-6/
ºC
15.416.014.715.013.516.016.0
Melting pointºC1450150015001500150015101520
Tensile strength
Mpa
580-680630-780630-780630-780600-700650-800680-830
Elongation at
rupture %
>16>12>12>12>12>12>10
Variation of
area %
65-7560-7565-7565-7565-7565-7565-75
Repeat bending
frequency(F/R)
>5>5>5>5>5>5>5
Hardness(H.B.)200-260200-260200-260200-260200-260200-260200-260
Micrographic
structure
FerriteFerriteFerriteFerriteFerriteFerriteFerrite
Magnetic
properties
MagneticMagneticMagneticMagneticMagneticMagneticMagnetic
 
Nichrome Chromium Electric Resistance Heating Alloy Wire
 
Package: Goods are supply in coil or on spool, Carton or wooden case in outside as demanded. 
Shipping: By vessel or by train from any Chinese port, Samples can be delivered by International express.
 
Nichrome Chromium Electric Resistance Heating Alloy Wire

Nichrome Chromium Electric Resistance Heating Alloy Wire
Our Service:
 
1. Timely response,
Timely response to your inquiry, multiple choice recommendations based on your demand, quickly respond mails and provide solutions.
 
2. Free sample
Sample and trial order is accepted for the quality evaluation.
 
3. Strict quality control
Arrange production on time and control quality strictly.
 
4. Shorter delivery time.
Book the earliest vessel or plane to guarantee the delivery time.
 
5. Professional Services
Provide all the detailed news and pictures from order to delivery;
Offer relative export documents and original certificate if needed;
Warm and considerable after-sale service

Company Information 
DKJL refractories exporting company is one of the most professional suppliers of refractories in China. Our main products are refractory and thermal insulation materials, heating elements, and industrial ceramics. They are available in various sizes and shapes. Our products enjoy a good reputation for their excellent quality and service in domestic and international markets.
 
Nichrome Chromium Electric Resistance Heating Alloy Wire
FAQ:
1. How can I get your prompt quotation?
We can give you reply with quotation quickly if you kindly send the inquiry with following factors: diameter (or thickness and width), brand name (or working temperature), electrical resistance (Resistivity), application and quantity.
 
2. What's the MOQ of the order?
No limit, we can offer the best suggestions and solutions according to your condition.

 
3. Which payment terms can you accept?
T/T,LC,Western Union,moneygram are available for us.

 
4. After an order is placed, when to deliver?
15-25days after confirming the order.



5. Does your company accept customization?
We accept OEM service.



6. How to solve the quality problems?
If the products don't conform to customer's samples or have quality problems, our company will be responsible to make compensation for it based on enough evidences.

 
7. What is the HS code?
The HS code is 85169090
 
 
 Welcome your inquiry and expect to provide satisfactory products and services for you.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours