0cr25al5 heating resistance wire/electric heating resistance wire

High-resistivity Fecral Insulation Heating WireDescription:With the high quality iron chrome aluminum for matrix, by pre - oxidation technologytreatment of the surface insulation resistance then tightly wound forming.Thermal efficiency increased by more than 20%.                  &nbs

Featured Products

High-resistivity Fecral Insulation Heating Wire

Description:
With the high quality iron chrome aluminum for matrix, by pre - oxidation technology
treatment of the surface insulation resistance then tightly wound forming.Thermal efficiency increased by more than 20%.
                                                                                        0Cr25Al5
Chemical Content(%)
CPSMnSiCrNiAlFeOther
Max0.06Max 0.025Max 0.025Max 0.70Max 1.023.0~26.0Max 0.604.5~6.5Bal.-
 
Mechanical Properties
Max Continuous Service Temp1250ºC
Resisivity at 20ºC1.42±0.06 ohm mm2/m
Density7.10 g/cm3
Thermal Conductivity46.1KJ/m·h·ºC
Coefficient of Thermal Expansion16.0×10-6/ºC
Melting Point1500ºC
Tensile Strength637~784 Mpa
ElongationMin 12%
Section Variation Shrink Rate65~75%
Repeatedly Bend FrequencyMin 5 times
Continuous Service Time-
Hardness200-260HB
Micrographic StructureFerrite
Magnetic PropertyMagnetic
Feature:
With long service life.Heating up fast.High thermal efficiency.Temperature uniformity. Can use vertically. When being used in the rated voltage,there is no volatile matter.It i the ne environmental protection electric heating wire.And an alternative to the costly nichrome wire.Can be customized according to customer requirements
0cr25al5 Heating Resistance Wire/Electrical Resistance Wire
0cr25al5 Heating Resistance Wire/Electrical Resistance Wire0cr25al5 Heating Resistance Wire/Electrical Resistance Wire0cr25al5 Heating Resistance Wire/Electrical Resistance WireUsage:
It is widely used in industrial furnace, household electrical appliances, infrared heater, etc.

The key properties:
1.The thickness of surface insulation resistance to oxidation layer: 5-15 μ m.
2. Insulation resistance: multimeter detection infinity.
3.The voltage-endurance of insulating single layer is greater than the alternating voltage 60 ν without breakdown.
4. The use of voltage: 6-380 ν.
5. Using temperature: Maximum1200 ºC
6. Service life: not less than 6000 hours.
7.Thermal shock performance: Electric heating element can withstand the cold and hot impact 600-6000 times without deformation.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours